No Wrench TPH Limit Adjustment | Tractor Modifications | Forum

Announcement: New Site Special – For a limited time all guest can ask questions in all forums! (Remember -Members Log in for full access)

	Current User: Guest

Search

Home Forum Tractor Modifications No Wrench TPH Limit Adjustment

No Wrench TPH Limit Adjustment

Print this Topic

Page: 1

Add a New Topic

User

Post

April 19, 2011

kmokgm

Lifetime Member

posts 8

Print this Post

1

Post edited 10:53 am – April 19, 2011 by kmokgm

FarmPro 2425–

I got tired of getting wrenches every time I wanted to adjust my TPH Limit. I decided to make one that didn't need wrenches.

I used 5/16" x 8" carriage bolt with 6" of thread, cut the head off and welded on a piece of 1/8" x 1" flat with a 5/16" hole. The overall length from end to center hole is 9-1/2".

I used a 5/16" x 1-1/2" machine bolt, 5/16" serrated flanged lock nut, plain washers, lock washer and nut to attach to the control valve lever.

For adjusters I used 5/16" Ny-Loc Knobnuts from the lawn & garden section of ACE Hardware. These are the knobs used to secure the folding handles on a walk behind lawn mower.

So far I have been very satisfied with the results. I can make precision adjustments as necessary from the seat.

If you decide to make one, verify as you go. This is a first attempt prototype but, so far so good.

I did have to heat and bend the PTO Selector Lever slightly outboard to avoid interference with the adjuster knob.

April 19, 2011

Tinbender

Lifetime Member Elite

posts 385

Print this Post

2

Sweet ! cool Sometimes the best mods are a little $ and a lot of brains. laugh

April 20, 2011

RichWaugh

Lifetime Member Elite

posts 280

Print this Post

3

Somehow I'm just not able to figure this one out. I guess that must be something different from what is on my 304 Jinma. Mine has a single lever for the TPH control and uses a couple of bolts/wingnuts to set limit stops for the lever. I guess the FP 2425 must have some different setup, right?

Page: 1

Topic RSS

About the Chinese Tractor Owners Association Forum	Forum Timezone: UTC -5
Most Users Ever Online: 44 Currently Online: 17 Guests Currently Browsing this Topic: 1 Guest	Forum Stats: Groups: 3 Forums: 15 Topics: 463 Posts: 4241	Membership: There are 953 Members There have been 64 Guests There is 1 Admin	Top Posters: Bob Rooks – 868 Tinbender – 385 RichWaugh – 280 Affordable – 195 Little_Grizzly – 184 SpringValley – 176 pepage – 119 Bert – 105 lenbo – 71 Carl Darnell – 68
Recent New Members: RickettyRic, Drdad, Crosswreck1, ccapers, todderickson
Administrators: CTOA (170 Posts)

About the Chinese Tractor Owners Association Forum

Forum Timezone: UTC -5

Most Users Ever Online: 44

Currently Online:
17 Guests

Currently Browsing this Topic:
1 Guest

Forum Stats:

Groups: 3
Forums: 15
Topics: 463
Posts: 4241

Membership:

There are 953 Members
There have been 64 Guests

There is 1 Admin

Top Posters:

Bob Rooks – 868
Tinbender – 385
RichWaugh – 280
Affordable – 195
Little_Grizzly – 184
SpringValley – 176
pepage – 119
Bert – 105
lenbo – 71
Carl Darnell – 68

Recent New Members: RickettyRic, Drdad, Crosswreck1, ccapers, todderickson

Administrators: CTOA (170 Posts)