Loading…

Anyone know where to find hyd seal kit for 20 series loader hyd

Forum Forums Help Me Find A Part Anyone know where to find hyd seal kit for 20 series loader hyd

This topic contains 4 replies, has 2 voices, and was last updated by  NuJinma 1 week, 4 days ago.

  • Author
    Posts
  • #47153

    NuJinma
    Participant
    • Offline

    Sent seal to Affordable who could not get seal kit for this cylinder. Part # UHS 40 50 6 It is for the lifting ram on my 20 series loader which was a ZL20 I believe. ( plate ripped off).
    I can get the seal, here: https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20170814194617&SearchText=hydraulic+seals+40mm+50mm+6mm .I put new seals in it a few years ago. ( 2005 Jinma 254) I would prefer to replace all the o-rings and such also, it would be easier with a seal kit. I bought a seal kit for a steering cylinder as it was the correct id and OD, did not think about the 6 (width), as you can see in the pic it is way too thick. Anyone know of seal kits available?

    Attachments:
    You must be logged in to view attached files.
  • #47158

    pedavies
    Participant
    • Offline

    There are kits available, just did one of mine with a kit from Asian Tractor Parts (Canada). Have to know if your piston is 25 or 28 mm when you order as I guess different years have different sizes.

    Paul

  • #47159

    pedavies
    Participant
    • Offline
     Says Pump Seal kit but it is for the lift and curl cylinders
    ZL20 Pump Seal kit

    CALL FOR PRICE 1-866-765-0110

    This seal kit comes in two different sizes for the ZL20 loader

    28mm or 25mm shaft dimensions

    Measure and then call us at 1-866-765-0110 to place order

     

    Paul

  • #47160

    NuJinma
    Participant
    • Offline

    OK, will do, Thanks Pedavies.
    pete

  • #47211

    NuJinma
    Participant
    • Offline

    Thank you, but somehow mine is different. I tried a couple of different places that both say will work but somehow i have different cylinders, my cylinders have a much greater diameter. I need 40 50 6 seal.

You must be logged in to reply to this topic.