Loading…

disengage clutch adjustment

Forum Forums Tractor Operation And Maintenance disengage clutch adjustment

This topic contains 5 replies, has 2 voices, and was last updated by  zen 2 months, 1 week ago.

  • Author
    Posts
  • #47138

    zen
    Participant
    • Offline

    I asked the wrong question a couple of days ago. My clutch works fine. No slipping what so ever. My problem is when I depress the clutch pedal the clutch wont’t disengage. Do I still need to adjust the clutch plates or is there an external adjustment. Any info would be appreciated. thx.

  • #47139
    Bob Rooks
    Bob Rooks
    Participant
    • Offline

    I don’t know what to say. You say the clutch works fine but it won’t disengage. To me that’s NOT fine.

    Check where the clutch pedal connects to the clutch cross shaft to see if the roll pin has been sheared. That’s the easy part. If the roll pin isn’t sheared and the shaft rotates with the clutch pedal, then the pins in the yoke have sheared, and you have to split the tractor to repair it (I believe).

    Yuchai dozer, Mustang skid steer, Mitsubishi mini-ex, Dual Dozer w/twin laser receivers, '50 Ford COE transit mixer.

  • #47141

    zen
    Participant
    • Offline

    Thx for your help Bob. I took the loader off and the side inspection cover off. I can see when I depress the clutch pedal the bearing slides forward to the 3 levers but barely moves them. Can I adjust those levers?

  • #47142
    Bob Rooks
    Bob Rooks
    Participant
    • Offline

    Yes, I believe you can, but that’s above my pay grade. Here are some tips, hope they help:

    https://www.circlegtractorparts.com/help-guides/jinma-clutch-adjustment.html

    Yuchai dozer, Mustang skid steer, Mitsubishi mini-ex, Dual Dozer w/twin laser receivers, '50 Ford COE transit mixer.

  • #47143

    zen
    Participant
    • Offline

    Thx again Bob. The article was very helpful. Going to attempt to do the adjustments and see what happens. If it doesn’t work I guess it’s off to find a repair shop with someone who knows what they are doing…lol.

  • #47144

    zen
    Participant
    • Offline

    Bob. Thought I let u know. I fixed my problem thx to your help. Took me all day. Adjusted the fingers on the clutch and disengages beautifully now. Thx again

You must be logged in to reply to this topic.