Loading…

FEL Control Valve w/Float Installed

Forum Forums Tractor Modifications FEL Control Valve w/Float Installed

This topic contains 3 replies, has 2 voices, and was last updated by  GD 2 weeks ago.

  • Author
    Posts
  • #47357

    GD
    Participant
    • Offline

    Just wanted to share with everyone that between surplus center and PA here in Canada i was able to install a control valve for the Jinma 284 FEL for under 600 Canadian. including CBSA taxes at border.

    it involved a 9-7401 from surplus and a couple hose and fittings from Princess auto. (feed and tank lines required new hoses)

    was able to re use the hoses that ran to the cylinders. tested no leaks more power and soooo much smoother to control.

    here are some pics

    05 Jinma 284 Y385
    ZL-20 FEL w/Brand Lv22 cntrl valve.
    LED Lights and a Light Bar.

  • #47358

    GD
    Participant
    • Offline

    Sorry all my pics are too big.  working on it.

    05 Jinma 284 Y385
    ZL-20 FEL w/Brand Lv22 cntrl valve.
    LED Lights and a Light Bar.

  • #47362

    Matthew Prestine
    Participant
    • Offline

    I would like to see some pics of it and know more on why you thought it needed to be upgraded.

    Tractor: 2007 Jinma 254XL with FEL
    Engine: Y385
    Transmision: HI/LO 6 speed with shuttle shift

  • #47367

    GD
    Participant
    • Offline

    Sure I upgraded cause I plow snow and level my gravel driveway with the FEL. Having a float position makes the job easier.

     

    Second, then stock fel valve that comes on jinma’s are very sensitive and jerky.  I didnt like the apprehention i had when working with old valve. You could master it if you geabbed the joystick at the base.  Having done it now i wouldnt go back. Excellwnt control. A new sense of confidence.

    Attachments:
    You must be logged in to view attached files.

    05 Jinma 284 Y385
    ZL-20 FEL w/Brand Lv22 cntrl valve.
    LED Lights and a Light Bar.

You must be logged in to reply to this topic.