Loading…

hydraulic hose for NorTrac 254….

Forum Forums Tractor Operation And Maintenance hydraulic hose for NorTrac 254….

This topic contains 2 replies, has 2 voices, and was last updated by  wmlroy 7 months, 4 weeks ago.

  • Author
    Posts
  • #46895

    wmlroy
    Participant
    • Offline

    I need a hydraulic hose for the above tractor….it is 11″ in length and has a 20mm banjo connector/fitting that bolts to the fluid distributor….I have the banjo bolt….the other end of the hose attaches to a quick release coupler…I have that part also….

    Apparently the newer tractors allcomewithan18mm banjo bolt and connector….the 20mmseems to be’ older  parts’.

    Can I get some kid of reducer bushing I can screw into the side of the bolt hole on the distributor housing that could reduce that hole to an18mm hole to accept the18mmbanjo olt

  • #46896

    Piper184
    Participant
    • Offline

    Try these guys. If nothing else, they may be able to custom make the hose you need.

    http://www.clearwaterhydraulics.com/index.php/

     

  • #46901

    wmlroy
    Participant
    • Offline

    thanks…..I have been checking everywhere I can and finally found a hydraulic hose shop near my home town and took the old hose in…he put some calipers to it and made me a new hose in 10 minutes….didn’t even know there was such a shop available—but thought  why not…back in business…thanks for the tip

    Will

You must be logged in to reply to this topic.