Loading…

Jinma 284 air box mod suggestion?

Forum Forums Tractor Modifications Jinma 284 air box mod suggestion?

This topic contains 4 replies, has 3 voices, and was last updated by  dogdoc 4 months ago.

  • Author
    Posts
  • #46976

    fido
    Participant
    • Offline

    Looking for someone who has suggestions on how to do this as I do not want to reinvent the wheel. Would like to move the airbox closer to the manifold under the hood, away from the radiator and have the air intake preferably above the hood. Would also like you to replace the cheesy airbox also. Don’t feel like scrounging scrap yards, bracket fabs won’t be a problem.   Oil bath? Sure but pricey. Looking more toward the “Donaldson” line of aftermarket dry filter housings but only a million to choose from. Ideally with a pre-filter on the inlet above or at least outside the hood. This would require a very long  flexible hose for thru the hood, or a rigid cobbled pvc thing out the side like the muffler is. Recently got elected to do a large amount of bush hoggin on a regular basis and my tractor is in a dust storm when I do that area.    Thanks in advance.

    Code 347 CLDTI

  • #47018
    analabor
    analabor
    Participant
    • Offline

    I tucked it in as shown.

    "It's easy for little monkeys to forget." HA and Margaret Rey, Curious George

  • #47019
    analabor
    analabor
    Participant
    • Offline

    compressed pic to upload.

    Attachments:
    You must be logged in to view attached files.

    "It's easy for little monkeys to forget." HA and Margaret Rey, Curious George

  • #47082

    dogdoc
    Participant
    • Offline

    This is what I did and am so glad to get it out of in front of radiator.

  • #47083

    dogdoc
    Participant
    • Offline

    pics are to big, will not post. basically made a bracket out of some old galvanized strap and 3/16 all thread and secured to a bolt holding fuel filter mount. has worked fine for a long time.

You must be logged in to reply to this topic.