Loading…

Loader cylinder seal kit needed

Forum Forums Help Me Find A Part Loader cylinder seal kit needed

This topic contains 6 replies, has 3 voices, and was last updated by  philtyler 9 months, 2 weeks ago.

  • Author
    Posts
  • #46574

    philtyler
    Participant
    • Offline

    I have a 10 year old Foton FT404 which is fitted with a Shandong Agricultural Machinery TZ04D loader. One on the lift cylinders has started to leak. Looking around I don’t see anyone advertising seal kits for these loaders. Can anyone point me in the right direction. Although I am in Australia, overseas availability is okay as seal kits are not heavy for international postage.  Thanks Phil

  • #46576
    Bob Rooks
    Bob Rooks
    Participant
    • Offline

    Almost any hydraulic shop that deals with metric sized cylinders should be able to help you. If you disassemble the cylinder and get measurements of the cup seals, wiper seals, and O-rings, you can probably order the parts online yourself. These are all off-the-shelf components.

    Yuchai dozer, Mustang skid steer, Mitsubishi mini-ex, Dual Dozer w/twin laser receivers, '50 Ford COE transit mixer.

  • #46577

    philtyler
    Participant
    • Offline

    Yes Bob Rooks it did occur to me that I might have to do that, failing to find an easily obtainable kit. Thanks

  • #46578
    Bob Rooks
    Bob Rooks
    Participant
    • Offline

    Check to see if there is a make/model number stamped on the cylinder – it may be able to be cross referenced to other brands.

    Kits may be available for the cylinder by providing the bore and rod size, and the cup seal type.

    Don’t know if you’ve contacted these folks, but they may be a good source for parts and service.

    http://www.midwaysales.com.au/value-east-wind-tractors.html

    Yuchai dozer, Mustang skid steer, Mitsubishi mini-ex, Dual Dozer w/twin laser receivers, '50 Ford COE transit mixer.

  • #46580

    Tontosgold
    Participant
    • Offline

    Yes check with Midway as they have a good range of parts. I have bought seal kits for my backhoe cylinders from them before – they even threw in some extras for free so now I  have spares.

    They will be hearing from me shortly as my dozer has just snapped an axle.

     

    Dozer YCT306S shuttle shift - root rake, tree-pusher, backhoe
    Excavator Hyundai 17 ton

    QLD, Australia

  • #46582
    Bob Rooks
    Bob Rooks
    Participant
    • Offline

    They will be hearing from me shortly as my dozer has just snapped an axle.

    Yikes! Sorry to hear that. Hope it goes smoothly.

    Yuchai dozer, Mustang skid steer, Mitsubishi mini-ex, Dual Dozer w/twin laser receivers, '50 Ford COE transit mixer.

  • #46594

    philtyler
    Participant
    • Offline

    Thanks for the suggestions guys. Phil

You must be logged in to reply to this topic.