Forum › Forums › Tractor Operation And Maintenance › New rear tire
- This topic has 8 replies, 2 voices, and was last updated 2 weeks, 1 day ago by
DavidPrivett.
-
AuthorPosts
-
-
July 23, 2026 at 10:16 pm #50518
For some reason my original post never got published. And some of my older posts have vanished as well. And the contact the moderator does not work either.
My original post stated that my rear tire inner tube failed after 23 years and driving it on a flat for 100 yards ruined the tire or the tire failed in several places and eventually allowed the inner tube to become punctured.
My replacement was found locally after waiting 24 hours and cost $350 plus $28 for a remount. The original Chinese tire was a 12 ply and this replacement tire is a 6 ply from India. And the replacement is 1/2” less wide even though it stated 9.5-24.
shrinkflation?Attachments:
You must be logged in to view attached files. -
July 24, 2026 at 8:55 am #50521
that is funny kinda, I had a tire failure also s year a rear ,I think a 8.3 x 20 ag grip ,had a external scar I guess that went thru and was also cracked internally . It made the tube being able to get punctured by something like a thorn. I lucked out and the co-op was able to save the tire by placing a internal boot over the inside crack and replacing the tube. That tractor is a 2005 ,but the tire have so much tread left I just hate to replace them just as preventive thing cause of age. But that time will come sooner or later. Just put solid tires on the skid steer ,no leaks there to worry about,but ride is stiffer for sure.
-
July 25, 2026 at 9:18 pm #50530
David;
I wanted to save this tire but there was 8 failures of varying degrees around the tire but all between the tire lug junctions.
Before I broke down the tire I re-inflated the punctured inner tube and saw that those tire lug slits actually widened and exposed the inner tube and likely caused the punctured tube.
But driving on a flat tire pulling a bush hog certainly didn’t help that rear tire and confused the exact reason why the tire failed.
Next time I will be more careful.
-
-
August 3, 2026 at 8:53 pm #50532
That 23 year old rear tire was a 12 ply tire and the one it replaced was a 6 ply.
Don’t know the thickness of the six ply but I took a plug from the old 12 ply tire and it was .340” thick. -
August 5, 2026 at 6:06 am #50533
just courious were the tires like r-4 industrial or ag grip?
-
August 21, 2026 at 7:11 am #50542
David, It was the Agricultural Tire with the Vee shaped lugs.
carlstar 9.5 -24R1 Farm Specialist TB made in India. 6 plyBTW, Again some of my posts are not getting published.
Are you having any problems?
-
-
August 20, 2026 at 9:02 am #50541
i just replaced two front 8.3 x 20 tires yesterday that were looking pretty bad ,plenty of thread left but the dry rot cracks were getting concerning. The tires I got were made in India so maybe that will be a move up from China made tires,but even they lasted 21 years. Went from 6 to 8 ply tires too.
-
August 21, 2026 at 6:48 pm #50543
yeah well this site has not worked well in a while. but I still use it, there is so few that use it ,that the number of bozos really does not exist so I like it in that wierd way.
-
-
AuthorPosts
- You must be logged in to reply to this topic.
