Back hoe disconnecting

Forum › Forums › Tractor Troubleshooting › Back hoe disconnecting

Viewing 4 reply threads
  • Author
    Posts
    • August 25, 2013 at 3:09 pm #36342
      lenbo
      Participant
        • Offline

        Roger

        I have a Jinma 354 with a LW7 BH. You can take the box (factory pump) with the hoses off of the rear of the tractor and there is a plate you can use as a cover after taking the pump off. If you bought the tractor new the dealer should have given you that plate.  If you don't have on you can order one from Tommy, Harold, or Jerry at Affordable Tractor. I re-worked  my hydraulics on my BH and installed a Prince pump so all I have to do now is disconnect the BH from the 3 point hitch and pull the pump off of the PTO spline.

         

        Len.

      • August 25, 2013 at 3:54 pm #36343
        Roger
        Participant
          • Offline

          Thanks Len I thought that might be what I needed to do but thought I would check to be sure.

        • August 25, 2013 at 6:20 pm #36346
          Bob Rooks
          Participant
            • Offline

            I'm glad that was cleared up. I had no idea what a “box” was.

            Account deleted.

          • August 25, 2013 at 7:30 pm #36348
            lenbo
            Participant
              • Offline

              Bob

              If anyone could figure this out it would be youhailkingreadin

               

              Lenlaugh

            • August 25, 2013 at 8:20 pm #36349
              Bob Rooks
              Participant
                • Offline

                Thanks Len. roflmaoroflmaoroflmao

                Account deleted.

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.