Current Dozer Owner |

This topic has 9 replies, 10 voices, and was last updated 13 years, 7 months ago by Little_Grizzly.

Viewing 8 reply threads

Author

Posts
- February 21, 2011 at 4:49 pm #31195
  mailman55
  Participant
  - Offline
  nortrac 3500, blade, steel tracks, 3pth, bought in 2003;
  
  have replaced main clutch, gear changing fork, seals in left steering clutch assembly , and various other minor maintance problems;
  
  leon
- February 22, 2011 at 12:48 am #31206
  DavidIAM
  Participant
  - Offline
  Yuchai fiberglass round sexy ??06?? yaller model standard shift backhoe FEL (never used)
  
  box scraper (never used) back blade (never used)
  
  anti-beaver dam damner device.
- February 22, 2011 at 2:32 am #31207
  Bob Rooks
  Participant
  - Offline
  '06 Yuchai YCT306-5A dozer, rubber tracks, manual clutch, Optional FEL equipped.
  
  Original battery, clutch, etc., small radiator repair, and extensive mods and upgrades. Only real issue that I didn't ask for was that it was originally shipped with one of the carrier roller shafts installed bacwards.
  
  Coming up on 600 hours.
  
  Account deleted.
- February 23, 2011 at 12:33 am #31257
  unclebobo
  Participant
  - Offline
  1996 model Rhino 3060 if I recall correctly.
- February 23, 2011 at 3:32 pm #31275
  Bluenoser
  Participant
  - Offline
  Steel Track – 306 – 2007 – manual trans (no shuttle shift) – 6 way – loader
  
  Only minor repairs to date.
- February 23, 2011 at 9:42 pm #31294
  kpsp50
  Participant
  - Offline
  2006 3500c bought 2nd hand orginally from nor trac, manual shift, steel tracks, all original, keep battery maintainer on when not in use. cleared 40 acers runs like new
- May 16, 2011 at 10:56 pm #32351
  LSF
  Participant
  - Offline
  2009 Yuchai dozer with FEL steel tracks, skid steer conversion, grapple rake, box blade, 6″ chipper, backhoe, wing and a prayer.
- November 9, 2011 at 8:47 pm #33634
  tractorfreak
  Participant
  - Offline
  2005 Nortrack NT3500C with steel tracks manual shift. I purchased the dozer with 100 hours on it. I have repaired the starter, replaced the voltage regulator, replaced the steering break on the right side, rebuilt the final drive on the right hand side(all bearings, seals and gears), repaired tack. Everything is 100% for now…
- November 9, 2011 at 10:26 pm #33636
  Little_Grizzly
  Participant
  - Offline
  Didn't realize this thread was here!
  
  2002.5 engine (non-EPA I think.) Rubber tracks with a spare set of steel tracks. Shuttle clutch, pendulum pedals. Rankin 72″ BB30 box blade to boot.
Author

Posts