Need starter for farmpro dozer yt-395e engine

Forum › Forums › Bulldozer & Excavator Operation and Maintenance › Need starter for farmpro dozer yt-395e engine

Viewing 6 reply threads
  • Author
    Posts
    • December 16, 2016 at 12:14 am #46555
      Bob Rooks
      Participant
        • Offline

        The TY396E Jiang Dong engine is used in a lot of Jinma tractors as well prior to 2015 if I’m not mistaken. You have a Yuchai or Guilin dozer, depending on the age, irrespective of the brand name on it which really means nothing. Circle-G Tractor, Ranch Hand Supply, Keno Tractor, etc. , they will all have your part.

        There is a nameplate on the left side of the engine that will have the model number on it.

        Account deleted.

      • December 16, 2016 at 12:31 pm #46559
        chuckinnc
        Participant
          • Offline

          Yep, Bob I saw a older thread from Keno Tractor, called them and talked to a guy named Adam which helped me with the starter problem.  Great service from those guys,  you can’t get anyone here in the east or mid east to listen once you say Chinese built.

        • December 16, 2016 at 12:48 pm #46560
          Bob Rooks
          Participant
            • Offline

            It’s my understanding that Northern Tool was always helpful and good to work with. maybe that’s changed?

            Account deleted.

          • December 16, 2016 at 6:41 pm #46565
            kenotractors
            Participant
              • Offline

              I’m so glad I was able to help you and thank you very much for the glowing review!

              Tyler Nystrom
              Keno Tractors
              parts@kenotractors.com
              866-363-8193
              Phone hours: M-F 8am to 5:30pm PST Sat 9am to 1pm PST

            • December 16, 2016 at 9:13 pm #46568
              chuckinnc
              Participant
                • Offline

                Thanks again Adam, however it looks like I want be able start on the Dozer starter project till after the holidays, will be back in tough then with photos and dimensions.

              • January 26, 2017 at 8:29 pm #46648
                chuckinnc
                Participant
                  • Offline

                  Bob Rooks,

                  I could not get any response from Farm pro or Northern tool, however I did get the correct starter from Keno tractors, the gear reduction  starter really spins the 395 engine over fast.  Back to playing in the dirt again, the old starter looked very crud compared to the new one which looked very well make, good to see they are making better replacement parts for these Chinese machines.

                • January 26, 2017 at 9:11 pm #46649
                  Bob Rooks
                  Participant
                    • Offline

                    I believe the aftermarket gear reduction starters are US made

                    chuckinnc wrote:

                    Yep, Bob I saw a older thread from Keno Tractor, called them and talked to a guy named Adam which helped me with the starter problem. Great service from those guys, you can’t get anyone here in the east or mid east to listen once you say Chinese built.

                    Quote

                    There is always Tommy, Phillip, and Ronald that service the mid-West and East coast, but Keno is a stand-up source also. I’ve used them several times. Can’t go wrong. Anyway, glad you’re up and running again.

                    Account deleted.

                • Author
                  Posts
                Viewing 6 reply threads
                • You must be logged in to reply to this topic.