Starter issue

Forum › Forums › Tractor Troubleshooting › Starter issue

Viewing 3 reply threads
  • Author
    Posts
    • August 24, 2012 at 10:17 am #35018
      Affordable
      Participant
        • Offline

        CHeck all your Ground & Positive cables first, sounds like it may be the starter solenoid. We have them as a seperate part if you want to just replace it, we also have complete new starters or the upgraded reduction type of starter

        SOLENOID   QD100C3 

        OEM Starter QD100 C3

        Upgrade       QDJ1332A

         

        Tommy

        Affordable Tractor Sales

        “Your Jinma Parts Superstore”

        http://www.affordabletractorsalesco.com

      • August 24, 2012 at 10:31 am #35019
        dogdoc
        Participant
          • Offline

          Cables and connections are good, already went over everything with a wire brush to get off that black paint!

        • August 24, 2012 at 11:17 pm #35020
          ronjin
          Participant
            • Offline

            Check the voltage that you are getting at the Interrupt Switch and starter with the key in the Start position.  On my 284 these are the wires involved.

            RonJ

             

            10

            		 Pink/White

            		 Ignition Switch (terminal 4)- Starter Interrupt Switch
            11

            		 Red

            		 Starter Interrupt Switch – Starter Solenoid small terminal

            ronjin

          • August 25, 2012 at 7:22 am #35022
            dogdoc
            Participant
              • Offline

              will do

              thanks

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.