zl-20 loader cylinder

Forum › Forums › Do It Yourself Projects › zl-20 loader cylinder

Viewing 7 reply threads
  • Author
    Posts
    • March 10, 2011 at 10:28 am #31584
      Bob Rooks
      Participant
        • Offline

        I believe the dealer where you purchased the kit should help you, however you will probably get lucky just going to a hydraulic shop. Most stock a lot of metric seals.

        Account deleted.

      • March 10, 2011 at 8:45 pm #31589
        Affordable
        Participant
          • Offline

          What color are your old seals, we had another customer last year that we found the 300 series steering kit fot his loader cylinder and it was a ZL-20.?

           

          I will check those kits tommorro

           

          Tommy

          Affordable Tractor Sales

          “Your Jinma Parts Superstore”

          http://www.affordabletractorsalesco.com

        • March 11, 2011 at 2:56 pm #31594
          wyobigk
          Participant
            • Offline

            Tommy the old seals are blue.

          • March 12, 2011 at 12:19 pm #31602
            Affordable
            Participant
              • Offline

              I found a complete new cylinder thats 28mm ,but all the other ones are 25mm.

              ??

               

              Tommy

              Affordable Tractor Sales

              “Your Jinma Parts Superstore”

              http://www.affordabletractorsalesco.com

            • March 14, 2011 at 9:23 am #31652
              Affordable
              Participant
                • Offline

                OK, Talked to my Guy in China, he said there are different factory's suppling the ZL-20 cylinders some use 28mm rods , some use 25 mm rods.I keep the 25 mm kits because I guess that is the most common, I just ordered some 28 mm kits and they will be here in about a week

                 

                Tommy

                Affordable Tractor Sales

                http://www.affordabletractorsalesco.com

              • March 14, 2011 at 4:13 pm #31659
                wyobigk
                Participant
                  • Offline

                  Tommy thanks for your help with this. I will get the holes in the joystick measure and give you a call.   Keith

                • March 14, 2011 at 4:43 pm #31661
                  Affordable
                  Participant
                    • Offline

                    Send me a e-mail with all of your contact info,I will let you know as soon as the kits come in if you want one

                     

                    tommy@affordabletractorsalesco.com

                     

                    Tommy

                    Affordable Tractor Sales

                  • December 1, 2011 at 11:10 pm #33847
                    rryocham
                    Participant
                      • Offline

                      I just rebuilt my ZL-20 cylinder. Based on the mfg date on my loader and tractor (Jinma 284 mfg 2004) I ordered the 28mm repair kit. Not knowing that the previous owner had changed out the cylinders to the newer ones, I proceded to try and install the seals….after messing up two of the seals, I realized that I had the wrong size. Next day I called Jerry at affordable and explained the problem..he sent out the correct kits as I sent back the others. No Charge!! I received the new kits and 20 minutes later I was back in business!! Many Thanks To Affordable Tractor Sales and Jerry!! Great to deal with!!

                      laughlaughlaughlaughlaughlaugh

                  • Author
                    Posts
                  Viewing 7 reply threads
                  • You must be logged in to reply to this topic.