ZL20

Forum › Forums › Tractor Operation And Maintenance › ZL20

Viewing 4 reply threads
  • Author
    Posts
    • September 10, 2013 at 9:48 am #36395
      Affordable
      Participant
        • Offline

        Try this under Jinma Maint.

         

        http://johnstractor.homestead……chAdj.html   

        It should help you

         

        Tommy

        Affordable Tractor Sales Co.

        “Your Jinma Parts Superstore”

        http://www.affordabletractorsalesco.com

      • September 10, 2013 at 3:59 pm #36396
        Tinbender
        Participant
          • Offline

          It's something about this site and http tags. Everything is missing between http://johnstractor.homestead   and   chAdj.html

          http://www.johnstractor.homestead.com will get you on the site.

        • September 23, 2013 at 4:14 pm #36422
          wsee
          Participant
            • Offline

            Thanx for the info I forgot abot that site anyway thru trial and error I removed that fel.    Had this tractor for ten years and it is the first time the fel has been off…. I really do appreciate the help and support….

          • September 23, 2013 at 4:51 pm #36423
            RichWaugh
            Participant
              • Offline

              I took mine off a couple of years ago and it was not fun.  The published method works, as long as you have a level, smooth, hard surface to work with – I don't.  I finally used my engine hoist/shop crane to hold it up so I could back the tractor out of it.  I hope I never have to do that again.

            • September 25, 2013 at 11:21 am #36424
              tractorpilot
              Participant
                • Offline

                I adjusted my clutch a couple years ago on my 284 but I only removed the left bracket by the bell housing to get access to the clutch.It worked fine with the loader at rest on the floor.

            • Author
              Posts
            Viewing 4 reply threads
            • You must be logged in to reply to this topic.