Shuttle shift

Forum › Forums › Tractor Troubleshooting › Shuttle shift

Viewing 2 reply threads
  • Author
    Posts
    • May 21, 2022 at 8:30 am #49872
      Mike C
      Participant
        • Offline

        I have a 2012 Jinma 284 and the shuttle shift is stuck in reverse, the lever will not come out of reverse. I can put the tractor in gear and move in reverse only. The shuttle shift lever has always been a little stiff to move between forward and reverse, now it is stuck and will not move out of reverse, could it be a linkage problem it looks OK at first glance. Any help welcome.

      • May 21, 2022 at 10:23 pm #49873
        Piper184
        Participant
          • Offline

          You might try asking over on the tractorybynet.com forums.

          I don’t have any information on a shuttle shift tractor and not many people monitor this site anymore.

        • May 23, 2022 at 8:33 am #49874
          DavidPrivett
          Participant
            • Offline

            yeah what could it hurt if you can get to the linkage just before it goes into the trans. disconnect it and then see if you can use some leverage to get the shift shaft to budge, also I would lubricate when it goes into the gear case housing. just only use a reasonable amount of force to get it to move.

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.